Login with your favorite social network:

[Colyer]

Small job(600 sq ft) for removal of asbestos tile from my condo.

[Hadon]

See the list below http://www.lni.wa.gov/WISHA/p-ts/Asbestos/AsbestosContractors.pdfContractor Name and Contact Person Certificate Number and DBA Name, ContactAddress and Phone # Expiration Date Person3 KINGS ENVIRONMENTAL, INC ED WOODWARD OR 1318SHEILA MIKLOSPO BOX 280 P:(360) 666-5464 ACTIVEBATTLE GROUND, WA 98604 F:(360) 666-8202 05/09/2008 P:[email protected] & C SERVICES INC TOBIAS ARROYO 132311010 51ST AVE SE P:(425) 218-4100 ACTIVEEVERETT, WA 98208 F:(800) 305-3376 03/05/2008 P:[email protected] & D COMPANY NW INC WADE WHITTON 126121702 84TH AVE S, SUITE 3 P:(253) 520-7977 ACTIVEKENT, WA 98032 F:(253) 520-7970 02/02/2008 P:[email protected] & F SERVICES TINA PAGE 14302102 208TH PL SW P:(206) 786-6667 ACTIVELYNNWOOD, WA 98036 F: 01/17/2008 P:[email protected] A S INC J SCOTT SAMPSON 1247PO BOX 3278 P:(360) 435-6682 ACTIVEARLINGTON, WA 98223-3278 F:(360) 435-7246 10/24/2007 P:AAA CONSTRUCTION PHILIP L. BERG 127613612 PENNINSULA DR N P:(509) 891-7575 ACTIVENEWMAN LAKE, WA 99025 F:(509) 226-3543 09/27/2007 P:[email protected] INC JENNIFER BURNS 138511225A GREENBURG RD STE 101 P:(503) 624-9221 ACTIVEPORTLAND, OR 97223 F:(503) 624-9222 07/10/2008 P:[email protected] CONTRACTORS INC LINDA HOBSON 127012604 NE 172ND AVE SUITE 110 P:(360) 882-0929 ACTIVEBRUSH PRAIRIE, WA 98606 F: 01/16/2008 P:ABLE RTW CORP HEIDI HAMILTON- 1393NEFFPO BOX 65390 P:(253) 566-5818 ACTIVETACOMA, WA 98464 F:(253) 566-5878 06/17/2008 P:ACCESS SERVICES, INC EDDIE SHUMWAY 1356PO BOX 55575 P:(206) 363-5422 ACTIVESEATTLE, WA 98155 F:(206) 363-5451 05/01/2008 P:[email protected] ENVIRONMENTAL SERVICES WILLIAM 1360PO BOX 9195 P:(253) 531-8585 ACTIVETACOMA, WA 98490 F:(253) 531-8088 06/24/2008 P:[email protected] SERVICES MARK ADDIS 1428348 N KENTUCKY P:(509) 679-5636 ACTIVEEAST WENATCHEE, WA 98802 F: 02/09/2008 P:[email protected] ENVIRONMENTAL DAN VENABLE 13173620 49TH AVE SW P:(360) 357-5666 ACTIVEOLYMPIA, WA 98512 F:(360) 357-5665 08/22/2008 P:ADVANCED CONTRACTING LLC KEN MARTIN 1380PO BOX 5 P:(509) 751-8838 ACTIVELEWISTON, ID 83501 F:(509) 751-8847 07/10/2008 P:ADVANCEDCONTRACT@CABLEONEAFFORDABLE ABATEMENT, INC BILL SCHROEDER 10793732 SMITH AVE # B P:(425) 303-8072 ACTIVEEVERETT, WA 98201-4546 F:(425) 303-8072 09/30/2007 P:[email protected] ENVIRONMENTAL, INC ANTHONY CHASE 1427PO BOX 40 P:(206) 793-1321 ACTIVEMT LK TERRACE, WA 98043 F:(425) 357-9868 03/30/2008 P:[email protected] COMMERCIAL SERVICES ANGELA BASTA 13695205 173RD PL SW P:(425) 218-5120 ACTIVELYNNWOOD, WA 98037 F: 10/28/2007 P:AGT ADVANCED ENVIROMENTAL GARY MOYER 13991221 SE BLUEBERRY RD P:(360) 710-4174 ACTIVEPORT ORCHARD, WA 98366 F: 09/22/2007 P:ALL SOUND SERVICES, LLC(DBA ALL DOUG ROOKS 1434 ALL SOUNDENVIRONMENTAL11012 CANYON RD E STE 8 PMB 385 P:(253) 538-5190 ACTIVE Doug RooksPUYALLUP, WA 98373 F:(253) 538-5362 07/07/2008 P:(253) [email protected] ABATEMENT GREG MCCARY 14075002 W 9TH AVE P:(509) 783-1130 ACTIVEKENNEWICK, WA 99336 F:(509) 783-1239 04/24/2008 P:AMERICAN ENVIRONMENTAL JOHN ASSELIN 1338PO BOX 81005 P:(206) 523-4441 ACTIVESEATTLE, WA 98108-1005 F:(206) 522-4099 06/22/2008 P:[email protected] QUALITY ENVIRONMENTAL, INC TONY FAWCETT 13652702 S A ST P:(253) 572-7175 ACTIVETACOMA, WA 98402 F:(253) 779-4020 08/08/2008 P:[email protected] INC ROBERT R. KINYON 120723525 HWY 99 E P:(541) 995-6008 ACTIVEHARRISBURG, OR 97446 F:(541) 995-1015 03/19/2008 P:[email protected] CLEAN INC THERESA BORST 1373PO BOX 3062 P:(425) 754-9369 ACTIVEARLINGTON, WA 98223 F:(360) 435-8180 01/07/2008 P:as you can see, there are many more :) Get the PDFPretty good overview of rules herehttp://www.leg.wa.gov/documents/wsr/2003/03/03-03-128.htmREGULATION III SECTION 4.05 PROCEDURES FOR ASBESTOS PROJECTS(a) Training Requirements It shall be unlawful for any person to cause or allow any work on an asbestos project unless it is performed by persons trained and certified in accordance with the standards established by the Washington State Department of Labor & Industries, the federal Occupational Safety & Health Administration, or the United States Environmental Protection Agency(whichever agency has jurisdiction) and whose certification is current. This certification requirement does not apply to asbestos projects conducted as part of a renovation in a single-family residence performed by the owner of the dwelling.(b) Friable Asbestos Removal Work Practices It shall be unlawful for any person to cause or allow the removal of friable, asbestos-containing material unless all the following requirements are met:(1) The asbestos project shall be conducted in a controlled area, clearly marked by barriers and asbestos warning signs. Access to the controlled area shall be restricted to authorized personnel only.(2) If a negative pressure enclosure is employed it shall be equipped with transparent viewing ports, if feasible, and shall be maintained in good working order.(3) Absorbent, friable, asbestos-containing material, such as surfacing material and thermal system insulation, shall be saturated with a liquid wetting agent prior to removal. Any unsaturated, absorbent, friable, asbestos-containing material exposed during removal shall be immediately saturated with a liquid wetting agent.(4) Nonabsorbent, friable, asbestos-containing material, such as cement asbestos board, shall be continuously coated with a liquid wetting agent on any exposed surface prior to and during removal. Any dry surfaces of nonabsorbent, friable, asbestos-containing material exposed during removal shall be immediately coated with a liquid wetting agent.(5) Metal components(such as valves, fire doors, and reactor vessels) that have internal friable, asbestos-containing material are exempt from the requirements of Sections 4.05(b)(3) and 4.05(b)(4) if all access to the friable, asbestos-containing material is welded shut or the component has mechanical seals, which cannot be removed by hand, that separate the friable, asbestos-containing material from the environment.(6) Except for surfacing materials being removed inside a negative pressure enclosure, friable, asbestos-containing materials that are being removed, have been removed, or may have fallen off components during an asbestos project shall be carefully lowered to the ground or a lower floor, not dropped, thrown, slid, or otherwise damaged.(7) All((friable,)) asbestos-containing waste material shall be sealed in leak-tight containers as soon as possible after removal but no later than the end of each work shift.(8) All absorbent,((friable,)) asbestos-containing waste material shall be kept saturated with a liquid wetting agent until sealed in leak-tight containers while saturated with a liquid wetting agent. All nonabsorbent,((friable,)) asbestos-containing waste material shall be kept coated with a liquid wetting agent until sealed in leak-tight containers while coated with a liquid wetting agent.(9) The exterior of each leak-tight container shall be free of all asbestos residue and shall be permanently labeled with an asbestos warning sign as specified by the Washington State Department of Labor and Industries or the federal Occupational Safety and Health Administration.(10) Immediately after sealing, each leak-tight container shall be permanently marked with the date the material was collected for disposal, the name of the waste generator, and the address at which the waste was generated. This marking must be readable without opening the container.(11) Leak-tight containers shall not be dropped, thrown, slid, or otherwise damaged.(12) The((friable,)) asbestos-containing waste material shall be stored in a controlled area until transported to an approved waste disposal site.(c) Method of Removal for Nonfriable, Asbestos-Containing Material It shall be unlawful for any person to cause or allow the removal of nonfriable, asbestos-containing material unless all the following requirements are met:(1) Sanding, grinding, abrading, or sawing of nonfriable, asbestos-containing material shall be prohibited unless the material that is disturbed is handled as friable, asbestos-containing material in accordance with the requirements in Section 4.05(b) of this regulation;(2) Appropriate dust control methods as provided in Section 9.15 of Regulation I shall be used, as necessary, to control fugitive dust emissions from the removal of nonfriable, asbestos-containing material;(3) After being removed, the nonfriable, asbestos-containing material shall be promptly transferred to a disposal container; and(4) Each disposal container shall have a sign identifying the material as nonfriable((, asbestos-containing waste material)) asbestos waste. Sources: http://www.lni.wa.gov/WISHA/p-ts/Asbestos/AsbestosContractors.pdf awarulz 77 months ago Please sign in to give a compliment. Please verify your account to give a compliment. Please sign in to send a message. Please verify your account to send a message.